Step Lights, Mini Step Lights & Brick Lights >
Louver, Prism or Scoop Cover
White, Bronze, Black or Aluminum finish
NSL LED Wall Star Wall Light & Xenon Wall Lights
Self-contained, complete die cast aluminum LED recessed or surface mounted 120VAC LED step light, wall light or ceiling fixture.
NSL LED Wall Star Wall Light , 120VAC uses only 5.2 watts.
Can be parallel wired ("daisy chained") up to 150 fixtures per circuit.
NSL LED Wall Star >
Xenon Wall Lights , 120VAC uses only 18 watts.
Can be parallel wired ("daisy chained") up to 1188 watts (66 bulbs) per circuit.
Louver, Prism or Scoop Cover
White, Bronze, Black or Aluminum finish
Stainless Steel Louver Cover available for use in corrosive environments, salt air or installed in limestone or other caustic materials.
Indoor or Outdoor.
Rated for Wet Location, Insulation Contact, Wall or Ceiling, Showers, Poured Concrete.
Dimmable!
Xenon Wall Light Surface Mounted with Prism Cover
Xenon Wall Light Surface Mounted with Louver Cover
Xenon Wall Light Recessed with Louver Cover
NSL Xenon Wall Light
Die cast aluminum surface or recessed mount Xenon light fixture of 18 watts. Dimmable. 120VAC input and output of fixture up to 66 fixtures per 15A tap. UL listed Wet Location. Offered in three cover styles and four fixture finishes.
Applications
Features
Xenon Advantages
NSL LED Wall Star Lighting Recessed with Prism Cover
NSL LED Wall Star and NSL Xenon Wall Light
can be surface mounted or recessed, flush with wall
 |
 |
| Xenon Wall Light | ||
|
XWL-L-(color) | Louver: White, Bronze, Aluminum and Black |
|
XWL-S-(color) | Scoop: White, Bronze, Aluminum and Black |
|
XWL-P-(color) | Prism: White, Bronze, Aluminum and Black |
 |
WL-CC | Wall Light Concrete Cap Concrete pour of NSL's XSL, XBL, XWL, LSL, LBL fixtures is now a snap with this well engineered accessory. |
| Replacement Bulb | ||
 |
XEN-12-18W |
12 volt, 18 watt Clear Xenon Replacement Bulb |
| Drill Bit | ||
 |
XWL-DRILL | 5" Diameter, 1.5" deep Hole Drill |
| Concrete Cap | ||
  |
WL-CC | Wall Light Concrete Cap Required for all concrete pour and brick wall applications Concrete Cap - direct pour mounting! |
Louver Cover
Prism Cover
Scoop Cover
White
Bronze
Black
Aluminum
Dimensions |
Cover | W | D |
| Louver | 6.375" | .75" | |
| Prism | 6.375" | .625" | |
| Scoop | 6.375" | 1.5" | |
| Can With surface mounting tabs removed |
4.875" | 3" | |
| Can With surface mounting tabs |
6.25" | 3" | |
| Hole | 5" | 3" |
Specifications |
|
| Voltage | 120VAC power input. Integral Class 2 12V transformer per fixture |
| Fixture Energy Rating | 120VAC, 170mA, 18 watts |
| Average Bulb Life | 10,000 hours |
| Color Temperature | 2800K +/-200K |
| Cover Finish | White, Black, Bronze, or Aluminum |
| Can Finish | White with white reflector |
| Construction | Both cover and can are die cast aluminum for corrosion protection, strength, weight and consistency of finish |
| Lens | Frosted glass |
| Wiring Options | 120V can be parallel wired ("daisy chained") up to 1188 watts (66 bulbs). |
| Dimming | Dimmable with an electronic low voltage dimmer on primary. |
| Agency Approval | UL listed and labeled wet and IC locations. Wall or surface mount only. |
| Warranty | One year. |
Xenon Wall Light — (Model no. XWL-P-WH)
| Lower Wall Surface Mount Lumens = 52.2 | Watts = 18 |
Height=9" from floor | |||||||||||
| Grid Location: | A | A1 | A2 | B | B1 | B2 | C | C1 | C2 | D | D1 | D2 |
| Illuminance in Footcandles: | 0 | 0 | 0 | 11.2 | 3.0 | 0.5 | 4.4 | 2.3 | 0.7 | 1.6 | 1.1 | 0.5 |
| Lower Wall Recessed Mount Lumens = 61.1 | Watts = 5.2 |
Height=9" from floor | |||||||||||
| Grid Location: | A | A1 | A2 | B | B1 | B2 | C | C1 | C2 | D | D1 | D2 |
| Illuminance in Footcandles: | 0 | 0 | 0 | 9.8 | 3.2 | 0.6 | 3.4 | 2.0 | 0.7 | 1.3 | 1.0 | 0.5 |
design42 New Media Web Design
1804 Meadowbrook Terrace
Hendersonville NC 28791
