NSL LED Wall Star Lighting

Louver, Prism or Scoop Cover
White, Bronze, Black or Aluminum finish

NSL LED Wall Star Wall Light & Xenon Wall Lights

Self-contained, complete die cast aluminum LED recessed or surface mounted 120VAC LED step light, wall light or ceiling fixture.

NSL LED Wall Star Wall Light , 120VAC uses only 5.2 watts.
Can be parallel wired ("daisy chained") up to 150 fixtures per circuit.

Xenon Wall Lights , 120VAC uses only 18 watts.
Can be parallel wired ("daisy chained") up to 1188 watts (66 bulbs) per circuit.
NSL Xenon Wall Lights >

Louver, Prism or Scoop Cover
White, Bronze, Black or Aluminum finish
Stainless Steel Louver Cover
available for use in corrosive environments, salt air or installed in limestone or other caustic materials.

Indoor or Outdoor.
Rated for Wet Location, Insulation Contact, Wall or Ceiling, Showers, Poured Concrete.
Dimmable!


NSL LED Wall Star Lighting

Die cast aluminum surface or recessed mount LED light Fixture of only 5.2 watts. Dimmable. 120VAC input and output of Fixture up to 150 Fixtures per 15A tap. Replaceable 120VDC LED module included. UL listed Wet Location. Offered in three cover styles and four Fixture finishes.

Applications

  • Interior Steps
  • Exterior Steps
  • Aisles
  • Halls
  • Paths
  • Patio Lighting
  • Entry Lighting
  • Post Lighting

Features

  • Replaceable 120 VDC LED Module
  • Pleasingly warm color temperature of 3100K
  • Dimmable
  • Can be surface mounted or recessed into any hole 2" diameter and 3" deep
  • Die cast aluminum cover and can.
  • Corrosion resistant powder coating.
  • Suitable for concrete pour.
  • Three cover designs: Louver, Prosm, Scoop.
  • Four cover color options: White, Black, Bronze or Aluminum.
  • Mounting flange for recessed mounting.
  • LED Wall Star has knock-off tabs for surface mounting
  • Numerous 120V NPT fittings for standard Romex input.
  • Push-in 120V connectors, no wire nuts required.

Suitable for:

  • Wet Locations
  • Insulation contact
  • Wall mount
  • Showers
  • Us in poured concrete

NSL LED Wall Star Lighting Recessed with Prism Cover
NSL LED Wall Star and NSL Xenon Wall Light
can be surface mounted or recessed, flush with wall

This chart is better viewed on a desktop computer or by turning your screen horizontal.

LED Wall Star

Cover Options:   L=Louver,   S=Scoop,   P=Prism
Color Options:  WH=White, BK=Black, BZ=Bronze, AL=Aluminum
LWS-L-WH  
LWS-L-BK  
LWS-L-BZ  
LWS-L-AL  
LWS-S-WH  
LWS-S-BK  
LWS-S-BZ  
LWS-S-AL  
LWS-P-WH  
LWS-P-BK  
LWS-P-BZ  
LWS-P-AL  
LED Wall Star Accessories
LEDMOD-32-FF 120VDC Replacement LED Module
XWL-DRILL 5" Diameter, 1.5" deep Hole Drill

WL-CC Wall Light Concrete Cap
Required for all concrete pour and brick wall applications
Concrete Cap - direct pour mounting!
  LMSII-001 Terminal Block Connector & Junction Box

Louver Cover

Prism Cover

Scoop Cover

White

Bronze

Black

Aluminum

This chart is better viewed on a desktop computer or by turning your screen horizontal.

Dimensions

Cover W D
Louver 6.375" .75"
Prism 6.375" .625"
Scoop 6.375" 1.5"
Can
With surface mounting tabs removed
4.875" 3"
Can
With surface mounting tabs
6.25" 3"
Hole 5" 3"

Specifications

 
Voltage 120VAC power input
Fixture Energy Rating 120VAC, 43mA, 5.2 watts
LED Module Life Replaceable 120VDC LED Module rated at 40,000 hours
LED Color Temperature 3100K +/- 200K
Cover Finish Power-coated white, black, Bronze, or natural aluminum
Can Finish Power-coated white with white Reflector
Construction Both cover and can are die cast aluminum for corrosion protection, strength, weight and consistency of finish.
Lens Frosted glass
Wiring Options 120V can be parallel wired ("daisy chained") up to 150 Fixtures per 15A tap. One wire between each Fixture completes chain. No custom cord required. Check local code and NEC for wiring selection.
Dimming Dimmable with standard 120VAC dimmer. See instructions for details.
Agency Approval UL listed and labeled wet and IC locations. Wall or surface mount only. Suitable for concrete pour.
Warranty Two years.

LED Wall Star Photometrics

LED Wall Star (Model no. LWS-P-WH-WH)
Lumens = 61.1  |  Watts = 5.2

This chart is better viewed on a desktop computer or by turning your screen horizontal.
Lower Wall Mount Application LED Wall Star (9" above Floor)
Grid Location: A A1 A2 B B1 B2 C C1 C2 D D1 D2
Illuminance in Footcandles: 0 0 0 5.62 2.23 0.47 1.62 1.08 0.46 0.59 0.47 0.28

Related Pages


design42 New Media Web Design
1804 Meadowbrook Terrace
Hendersonville NC 28791