NSL Collections

Step Lights, Mini Step Lights, Brick Lights NSL Collections
Under Counter and Task

Step & Wall Lights

Landscape & Architectural

NSL LED eStrip

NSL Specialty Lighting Effects

NSL Indoor/Outdoor Lighting

NSL LED MiniDisc Scoop Lights

LED MiniDisc Scoop Light - Amber

LED MiniDisc Scoop Light - Cool White

NSL LED MiniDisc & LED MiniDisc Scoop Lights

LEDMD LED MiniDisc Light
LEDMDS LED MiniDisc Scoop Light
Warm White, Cool White, Green, Blue, Red or Amber LED
Powder Coat Aluminum, Powder Coat Bronze, Powder Coat White or Powder Coat Black finish
NSL LED MiniDisc Lights >

Die cast aluminum Warm White, Cool White, Green, Blue, Red or Amber LED recessed 12 volt LED step light, wall, floor, direct burial or ceiling light uses only 0.54 watts per fixture.

Safe 12 volt, Class 2 remote power supply parallel wires ("daisy chains") up to 100 fixtures per LED Driver.

Frosted Tempered Glass lens
Warm White, Cool White, Green, Blue, Red or Amber LED
Powder Coat Aluminum, Powder Coat Bronze, Powder Coat White or Powder Coat Black finish

Indoor or Outdoor.
Rated for Wet Location, Wall, Floor or Ceiling, Showers, Outdoor Burial.
Dimmable!

NSL LED MiniDisc Scoop Light

Die cast aluminum recessed mini LED accent fixture with scoop cover design. Low 0.54 watt LED provides 80% energy savings vs. Xenon/Halogen technology. Dimmable. Fixture circuitry allows expandable system design from 1 to 100 fixtures per appropriate Class 2 LED driver. ETL listed for in-wall, in-floor, outdoor wet and outdoor burial applications. Offered in six LED colors and four fixture finishes.

Applications

Steps
Aisles
Paths
Driveways
Direction Lighting
Information Lighting
Decorative Lighting
Merchandising
Landscape Accents

Features

Save 12 volt, Class 2 power supply, remote
Up to 100 fixtures per power supply
Dimmable
Fits in any 1" diameter hole, 3 1/2" long
LED Module
- Low energy requirements of 0.54 watt per fixture
- 6 LED colors: Warm White, Cool White, Green, Blue, Red, Amber
5 cover colors: Aluminum, Black, White, Bronze, Stainless Steel

Suitable for:

In wall applications
In floor applications
Outdoor wet locations
Outdoor burial locations

Colors

Warm White

Cool White

Blue

Red

Green

Amber

This chart is better viewed on a desktop computer or by turning your screen horizontal.

LED MiniDisc Light
	LEDMDS-(color)-AL	Aluminum finish cover LED Color Options: Cool White, Warm White, Blue, Green, Amber and Red
	LEDMDS-(color)-BZ	Bronze finish cover LED Color Options: Cool White, Warm White, Blue, Green, Amber and Red
	LEDMDS-(color)-WH	White finish cover LED Color Options: Cool White, Warm White, Blue, Green, Amber and Red
	LEDMDS-(color)-BK	Black finish cover LED Color Options: Cool White, Warm White, Blue, Green, Amber and Red
Concrete Form
	LEDMD-CF	5" long plastic tube with end caps for concrete pour placement of the LED MiniDisc
LED Driver - Non Dimmable
	LEDDR-12-60W	12V, 60W, Class 2 LED Driver UL Listed indoor and outdoor use. Requires 110VAC to be hardwired to driver. Ships complete with one UR Listed low voltage output strain relief. Strain relief includes a gland with three 18g holes (three separate output lines of LED MiniDiscs). LEDDR-12-60W can drive up to 100 LED MiniDiscs.
LED Drivers - Dimmable
	TR12L20DC	12VDC, 20 watt, DIMMABLE LED Driver. Indoor/outdoor, Class 2. Contains 1 circuit at 20 watts on secondary. DIMMABLE.**
	TR12L40DC	12VDC, 40 watt, DIMMABLE LED Driver. Indoor/outdoor, Class 2. Contains 1 circuit at 40 watts on secondary. DIMMABLE.**
	TR12L60DC	12VDC, 60 watt, DIMMABLE LED Driver. Indoor/outdoor, Class 2. Contains 1 circuit at 60 watts on secondary. DIMMABLE.**
	**For all DIMMABLE LED Drivers: Dimming requires Analog Low Voltage Magnetic Dimmer (NSL Part #ED-LV/W-480 or ED-LV/I-480). Secondary 18AWG listed waterproof strain relief included. 6.6" (L) x 3.75" (W) x 2.3" (H)

Schematics

LED MiniDisc Lights require a hole 3-1/2" long x 1" diameter.
For Flush Mount Application center drill an additional 2" diameter hole, 5/32" deep.

LEDMD-CF Concrete Form

LEDMD-CF 5" long, plastic tube with end caps for concrete pour placement of the LED Mini Disc.

Concrete Form

Concrete form, before LED MiniDisc is installed.

Concrete form, after LED MiniDisc is installed and operating.

Concrete form fits over most 1/2" conduit junction boxes for easy wire installation/removal.

This chart is better viewed on a desktop computer or by turning your screen horizontal.

Specifications
Voltage	12VDC
Fixture Energy Rating	12VDC, 45mA, 0.54 watts
LED Color Temperature	Warm White 3800K +/-200K, Cool White 7000K +/-200K
LED Life	Rated at 40,000 hours
LED Colors	Warm White, Cool White, Green, Blue, Red, Amber
Cover Finish	Aluminum, White, Bronze, Black
Barrel Finish	Aluminum, White, Bronze, Black
Construction	Both cover and barrel are die cast aluminum for corrosion protection, strength, weight and consistency of finish.
Lens	Frosted Tempered Glass
Wiring Options	Up to 100 MiniDisc Lights per LED Driver by parallel wiring ("daisy chain") between fixtures. One wire completes chain. No custom cord required. NOTE: Use LW-18G-CL2 for all in-wall applications. Use LW-18G-BUR for all outdoor and burial applications.
Dimming	Dimmable with appropriate LED Magnetic Power Supply and dimmer. See instructions for details.
Agency Approval	ETL listed and labeled for wet, IC, ceiling and direct burial applications.
Warranty	Two years.

LED MiniDisc Scoop Photometrics

LED MiniDisc Scoop Light (3" above floor) (Model no. LEDMDs -WW-YY)
Lumens = 2 | Watts = 0.54

This chart is better viewed on a desktop computer or by turning your screen horizontal.

Floor Photometrics (Cool White)	3" above Floor
Grid Location:	A	A1	A2	B	B1	B2	C	C1	C2	D	D1	D2
Illuminance in Footcandles:	1.44	0.07	0.01	0.86	0.22	0.03	0.12	0.07	0.03	0.04	0.03	0.02

Mini Step Lights, Mini Wall Lights & Deck Lights

Step Lights & Wall Lights

Brick Lights & LED Brick Lights

Site Map - Archive Site Map

NSL LED MiniDisc Scoop Lights

LEDMD-CF Concrete Form

Concrete Form

Specifications

LED MiniDisc Scoop Photometrics

Related Pages